Wood Sawdust Blocks Production Line
-
Auto Block Cutter
This equipment can be used for automatic cutting of wood chip planer pier, multi-layer board foot pier, solid wood wooden square; cutting length specification can be adjusted, 100*100mm specification can be realized within the double bar at the same time cutting, 100-200mm specification of the single bar cutting. (beyond the conventional length, height range, you can contact the customized)
-
Blocks Multi Rip Saw
Blocks Multi Rip Saw is suitable for cutting chip pallets, solid wood, multi-layer wood, it dominates the wood panel processing equipment, this machine has the characteristics of stable operation, efficient production, safe operation and easy maintenance.
This Blocks Multi Rip Saw is simple and easy to operate, the machine has less dust and very good dust collection effect when cutting wood blocks.
-
Rotary type dryer
The special dryer for wood chips is designed and manufactured for drying sawdust, small wood chips and wood veneer. It is characterized by large drying output, remarkable energy-saving effect and low maintenance. The main working principle is: wood chips enter into the rotary drum by the blowing pipe and the rotary cylinder body together, the material in the cylinder boiling fluidization, hot air and the material fully touch, complete drying.
-
Mixer
Mobile small mixer turn light and handy, using single-phase reducer motor, easy to use electricity, as long as there is a lighting power supply of the pen can be plugged in to use. The mixing barrel is made of high-strength rust-free steel plate, so you don’t have to worry about rusting and contaminating the feed caused by mixing fermented feed. Combined with the special structure design of the stirring knife, so that the processing of raw materials in the barrel tumbling speed, stirring to achieve a complete dead-end, completely solve the traditional mixer barrel bottom of the existence of dead-end mixing uneven problem, high mixing uniformity, in the mixer to add preventive drugs and feed additives without worrying about mixing uneven medicine. Although the mixer structure is small, but the installation of the reducer motor mixing strength is absolutely strong, mixing efficient and powerful.
-
Pipes Dryer
The so-called airflow drying refers to the wet sawdust in the form of powder and granule, which is continuously added into the drying tube by screw conveyor. In the high-speed hot air conveying and dispersion, so that the moisture in the wet material evaporation, get powder or granular dry product process. It is mainly composed of air heater, feeder, airflow drying tube, cyclone separator, fan and so on.
-
Wood Block Presser
Wood Block Presser mainly uses shavings, wood chips and other waste materials, by mixing with the glue ratio, through drying, gluing, hot press heating and pressure to produce shavings, wood chips foot pier, the surface is smooth and smooth, good waterproof (soak water 48 hours without cracking, wind scraping and sun exposure without cracking). Equipment structure is simple, easy to operate, the production of wood pads clean and environmentally friendly, broad market prospects, in line with national industrial development policy. It is necessary to pay attention to: you need to wear goggles when operating to ensure safety.