A thread rolling machine is a mechanical device commonly used in industrial production, and it plays an important role in a number of critical tasks. However, just like any other mechanical equipment, wire rolling machines may encounter some common faults and problems. In this article, we will introduce some common thread rolling machine faults, and provide the corresponding solutions to help users quickly solve the problem.
First, the causes and solutions of excessive noise rolling machine
When using the wire rolling machine, if you find that the noise is too large, it may be due to the following reasons: First, the silk lever is not fully lubricated, the solution is to add lubricant in a timely manner; Second, the silk lever is damaged or worn out, you need to replace the silk lever with a new one; Third, the machine base is not stable, can be solved by re-fixing the machine base.
Second, the reasons and solutions for the unstable operation of the rolling machine
When the rolling machine in the running process is not smooth, it may be due to the following reasons: First, the gap between the silk lever and the guide rail is not suitable, need to be adjusted; Second, the motor power of the rolling machine is not enough, you can consider replacing the motor with a higher power; Third, the guide rail is damaged or dirty, need to be cleaned and maintained.
Third, the reasons and solutions for the slow running speed of the rolling machine
If you find that the running speed of the thread rolling machine is too slow, it may be caused by the following reasons: first, the motor voltage is unstable, you can check the power supply voltage and adjust; second, the thread rolling machine is overloaded, you need to reduce the load; third, the silk lever is worn out, you need to replace the new silk lever.
Fourth, the position error of the rolling machine is too large reasons and solutions
When the position error of the rolling machine is too large, it may be caused by the following reasons: first, the gap between the silk lever and the guide rail is not suitable, you need to adjust the gap; second, there are problems with the control system of the rolling machine, you can check the control system and make adjustments; third, the sensor of the rolling machine failure, you need to repair or replace the sensor.
The above are some common thread rolling machine faults and solutions, I hope users can help. If you encounter other problems when using the thread rolling machine, it is recommended to consult professional and technical personnel in time to solve the problem, in order to ensure the normal operation of the equipment.
Post time: Sep-26-2023