Automatic nail-making machine principle:
Automatic nail making machine is configured to have three different specifications of the wire drawing machine and a polishing machine. Applicable to all types of waste steel, than 3-8mm welding rod, wire, wire and other scrap materials car. According to the different specifications of raw materials, we choose different specifications of the wire drawing machine for drawing and rust ( completed ), and then sent to the nail making machine, a processing into a round nail: 2 inch, 2.5 inch, 3 inch, 3.5 inch, ( according to a round nail size adjusting nail and die ), and then after a polishing machine can packing factory.
Automatic nail making machine using the method:
Automatic nail mechanism for nailing machine, high degree of automation, the operation is very simple, elderly women, disabled persons can operate.Not only that, in comparison, the operation state of this efficient napping machine is more stable during the napping process, and the feeding is accurate, the working efficiency is high, and the production capacity is large.
In the production process, round nails in the nail cap and the nail tip in a process at the same time. In nail-making machine changing different mold, can produce all kinds of specifications 2-6 inches round nail. In the production of 6 inch nails for example : 6.5 steel after 6.5 drawing machine drawing, to nail machine once hit into 6 inch nails. In the production of 3 inch nails for example: < 4mm first reinforced by A drawing machine drawing of diameter 3.4mm, and then sent to the nail making machine, put on 3 inch nails die, can play ( 80 * 3.4mm ) standard 3 inch nails; the production of 2.5 inch nails, 3.5 bars, after B drawing machine to a 2.8mm when send nail-making machine ( for 2.5 inch nails die ), turn on the power, i.e. a 2.5 inch ( 6 x 2.8mm ) round nail.
Post time: Aug-02-2023