Products
-
Pipe Clip Nail
Specification：Φ15mm Φ20mm Φ25mm
Use：Fixed water pipe and line pipe
-
Integrated ceiling nails
Integrated ceiling nails are mainly used in integrated ceilings, with a length of 32 mm (also available in 42 mm, special order), a diameter of 8.5 mm for the plastic shell and a thickness of 2 mm for the iron sheet. The nail has a threaded hole with a diameter of 6mm, 8mm or 10mm. This threaded hole is just right for docking the fillet rod, also called a spreader bar or screw. Then it goes on down to link the keel finally to achieve the ceiling installation of the roof.
-
Pipes Dryer
The so-called airflow drying refers to the wet sawdust in the form of powder and granule, which is continuously added into the drying tube by screw conveyor. In the high-speed hot air conveying and dispersion, so that the moisture in the wet material evaporation, get powder or granular dry product process. It is mainly composed of air heater, feeder, airflow drying tube, cyclone separator, fan and so on.
-
Wood Block Presser
Wood Block Presser mainly uses shavings, wood chips and other waste materials, by mixing with the glue ratio, through drying, gluing, hot press heating and pressure to produce shavings, wood chips foot pier, the surface is smooth and smooth, good waterproof (soak water 48 hours without cracking, wind scraping and sun exposure without cracking). Equipment structure is simple, easy to operate, the production of wood pads clean and environmentally friendly, broad market prospects, in line with national industrial development policy. It is necessary to pay attention to: you need to wear goggles when operating to ensure safety.
-
Collated Drywall Screw
Leg length: 16mm to 60mm
Use: for joining plasterboard and keel, furniture
-
Bright wire straight line wire drawing machine
Wire drawing machine is the stainless steel wire drawing wire wound on the mechanical metal hose or metal coil, and the metal hose or metal coil wound on a variety of specifications of the metal tube (or belt), and stainless steel wire drawing machine wound on the metal tube (or belt) of the wire drawing machine, through stretching to produce a certain plastic deformation of the stainless steel wire to obtain the required diameter and shape.
-
Gas Shooting Nails
Nails are generally fired by a nail gun and driven into the nails of the building. Usually consists of a nail with a gear ring or plastic retaining collar. The function of the ring gear and the plastic positioning collar is to fix the nail body in the barrel of the nail gun, so as to avoid sideways deviation when firing.
The shape of the nail is similar to that of the cement nail, but it is shot in a gun. Relatively speaking, nail fastening is better and more economical than manual construction. At the same time, it is easier to construct than other nails. Nails are mostly used in the construction of wooden engineering and construction engineering, such as joinery and wooden surface engineering, etc. The function of the nails is to drive the nails into the matrix such as concrete or steel plate to fasten the connection. -
Chipboard Screws
In the whole fastener industry, this product is a similar drywall screw as important and huge sales of varieties, in the furniture manufacturing and other industries widely used. Currently, domestic consumers purchase this variety in building material supermarkets, mainly for the installation of rails, hinges, with fish-style expansion installation and as an alternative to wood screw installation for making furniture, cabinets, etc. Length:30mm 40mm 50mm
-
Twister Nails
1、One-time fixing.Twister nails can fix plastic products and twister nails at once, avoiding the loss caused by poor fixing, repeated pulling out and nailing in.
2, We use carbon steel material to make, the surface is galvanised, corrosion resistant, can extend the use of time.
3、With a relatively high cost performance, the twister nails currently on sale in the market is a type of nail specifically used to fix asbestos tiles, the market is well stocked, therefore, twister nails are an excellent choice for fixing plastic and asbestos products.
All the products produced by the company have been strictly inspected by the quality supervision department and are of excellent quality. The test approved qualified products, selling all over the world to get more and more users praise. -
Self Drilling Screws With Wing
It is used to connect the keel to the calcium silicate board during decoration.
Length：25mm 35mm
-
Staple F Nails/MB Brad series
The length of the product has 10mm 15mm 20mm 25mm 30mm 35mm 40mm 45mm 50mm specification available for choice.The nail body has been nade of high quality galvanized iron wire,sharp but sturdy and durable.
-
Carton Closing machine
Weight
2.15kg
Size
342*115*220mm(L*W*H)
Capacity
100pcs
Air pressure
6-8kgf/c㎡