Welcome to our websites!

Self Drilling Screw Thread Rolling Machine

Short Description:


Product Detail

Product Tags

Parameter

Model Max.Cut diameter Max. BlankLength Die Dimensions(w) Die Dimensions(t) Moving die minension(l) Stationary Die Dimensions(l) Output rate Body Motor Power L*W*H Weight
unit mm mm mm mm   mm Pcs/min KW mm KG
UST-003 3 25 15 25 55 45 420-480 0.75 1050x790x1150 600
UST-003A 3 30 20 30 75 65 200-245 1.5 1100x850x950 650
UST-003 Totally-Enclosed 3 25 15 25 55 45 420-480 0.75 1060x830x1140 680
UST-004 Totally-Enclosed 4 30 20 30 80 65 320-380 2.2 1290x975x1330 650
UST-004B Hopper 4 40 25 40 90 75 260 2.2-6级 1995x1410x1490 1000
UST-004B Semi-Closed Vibration Disk 4 40 25 40 90 75 260 2.2-6级 1730x1260x1420 1100
UST-004CB Semi-Closed Hopper 5 55 25 55 105 90 220-240 3 1850x1250x1400 1500
UST-004CB Semi-Closed Vibration Disk 5 55 25 55 105 90 220-240 3 1850x1380x1400 1600
UST-15B 6 55 25 55 125 110 180 5.5 2000x1550x1450 1750
UST-15B 6 80 25 80 125 110 180 5.5 2000x1550x1450 1900
UST-15B 6 105 25 55 125 110 160 5.5 2000x1650x1500 2000
UST-20B 8 105 25(30) 105 170 150 140 7.5 2450x1820x1600 2850
UST-20LL 8 200 25(30) 105 170 150 60-110 11 2800x2000x1600 4000
UST-30 12 155 40(38) 158 215 190 60 22 3290x1600x1700 5500
UST-25 Vibration Disk 10 155 25(30) 155 170 150 120 11 2800x1900x1550 3600
UST-30 Vibration Disk 12 150 40(38) 155 215 190 50-90 15 3420x1680x1795 5500
UST-40 20 200 50(45) 155 265 230 45-60 30 3500*2500*1950 8500

The principle of thread rolling is to use the plasticity of metal to roll the formed semi-finished products to achieve the required thread specifications. It is characterized by direct pressing without waste, low cost, high efficiency, high smoothness, and uniform precision. Compared with cutting processing, its output product has high strength. The basic conditions of tooth rolling work: two parallel tooth plates, taking the length Ls of the static tooth plate as the standard, its length is more than 20 times the diameter of the processed object, but not more than 35 times. The number of turns in the tooth plate should not be less than 6 turns for wood screws, and not less than 4 turns for machine screws. If the number of turns is insufficient, the processed object will be forced to be pressed by it to cause oval or abnormal deformation, which will affect the structure and quality of the material. Mechanical properties.

Detail Drawing

Self Drilling Screw Thread Rolling Machine-1

Semi-Closed

Self Drilling Screw Thread Rolling Machine-2

Totally-Enclosed

Self Drilling Screw Thread Rolling Machine Final Product

Self Drilling Screw Thread Rolling Machine Final Product


  • Previous:
  • Next:

  • Write your message here and send it to us