Many friends know that nail making machinery belongs to a good performance equipment, but for its production process may not be too clear. So, do you know its specific working process is how, in the production, what steps need to go through? Next, we will address the issue of nail making machinery to briefly introduce with you, I hope to be able to help you.
First of all, is to choose the required processing materials. Usually, we are using scrap steel as raw materials to make nails. The specific process is to first select the material, and then the drawing process, followed by the use of nail machinery for processing, and then use the polishing machine for processing, and finally for packaging, after which it can be shipped. In this process, one of the drawing link is still more important.
When we are making nails, we must first determine the specific material used, because if we use scrap steel for processing, then it is more troublesome in the processing, but the profit it brings is very considerable. Therefore, we need to pay special attention to the drawing process, after the drawing process, you can use the nail making machinery to make nails. At this time we will get semi-finished nails.
After that, we also need to carry out polishing, specifically, it is the use of nail making machinery processing out of the semi-finished stator into the polishing machine, for polishing, after polishing treatment, you get a relatively smooth nail products. After that, we need to choose different packaging methods according to different nail products. For different products, they should be packed in different ways to prepare for the factory.
The above content is a rough process about the nail making work introduced for us by the nail making machinery manufacturer. I believe that through this introduction, you have a clearer understanding of this process.
Post time: Aug-16-2023